Used in non-pressure solar water heater system and pre-heating solar water heater system
Used in the tank
Direct insert type or screw type
Used in rain or cloudy day if the water in tank is not warm enough
|Intelligent controller of split system||
2.Power supply:200V-240V AC or 100V-130V AC,50-60Hz.
3.Power consumption: < 4W
4.Accuracy of temperature measuring: ± 2°C
5.Range of collector temperature measuring: -10oC ~200°C
6.Range of tank temperature measuring: 0°C ~110°C
7.Suitable power of pump: 3 pumps possible to be connected, power of each pump <= 300W .
8.Suitable power of electrical heater: 1pc <= 1500W .
9.Inputs: 4 sensors,
1pcs*PT1000 sensor (≤500°C) for collector (silicon cable≤280°C),
3pcs*NTC10K, B=3950 sensor (≤ 135°C) for tank, (PVC cable ≤105°C),
10.Outputs:4 relays, for circulation pumps or 3-way electromagnetic valve
11.Ambient temperature:-10°C ~ 50°C.
12.Water proof grade: IP40.
|Integrative intelligent controller for pressurized system||
2.Self power consumption: <3W
3.Electromagnetic valve parameter: DC 12V, AC 220V,pressurized valve and un-pressurized valve are available for selection
4.Measuring accuracy of temperature: ±2°C
5.Temperature range of measurement: 0~99°C
6.Power of auxiliary electrical booster≤2000W
7.Ambient temperature: -10~50°C
8.Water proof grade: IP40
|Intelligent controller for non pressurized system integrator||
1. Dimension: 210 mm x 145mm x 40mm
2. Self power consumption: <3W
3. Measuring accuracy of temperature: ±2C
4. Temperature range of measurement: 0~99°C
5. Maximum power of controlled pump: <=600W
6. Power of accompanied electrical heating wire: <=800W
7. Power of auxiliary electrical booster <=2000W ( standard collocation)
<=3000W (not standard, selection available )
8. Electromagnetic valve parameter: DC 12V, AC 220V, pressurized
Valve and un-pressurized valve are available for selection,
9. Operation pressure of pressurized valve: 0.02Mpa ~ 0.8Mpa
|1/2'' or 3/4'|